Tissue saturation and off-gassing: what Bühlmann's model won't tell you
Back to Blog
Consejos

Tissue saturation and off-gassing: what Bühlmann's model won't tell you

C
CDB
November 15, 2026 3 min read

Your dive computer shows you a number — NDL or remaining bottom time — and you trust it as ground truth. Behind that number sits a mathematical model built on assumptions worth questioning. Understanding how Bühlmann works makes you a better diver, not because you'll ever compute tables by hand, but because you'll know when to trust the reading and when to be suspicious.

Albert Bühlmann was a Swiss physician who spent 30 years at the University of Zurich studying decompression. His model, ZH-L16, divides the human body into 16 theoretical tissue compartments, each with its own rate of saturation and off-gassing. These aren't real organs — they're mathematical abstractions that approximate how different tissues absorb and release nitrogen.

Fast compartments (1–3) represent tissues like blood and brain: they saturate in minutes and off-gas in minutes. Slow compartments (13–16) cover fat, joints, and bone marrow: they take hours to load and hours to unload. Drop to 30 m and the fast compartments hit their ceiling well before the slow ones. On ascent, the fast ones shed nitrogen quickly while the slow ones stay loaded for hours.

The critical concept is the M-value — the maximum supersaturation a compartment can tolerate before bubble formation becomes a problem. Every compartment has its own M-value at every depth. The computer constantly tracks supersaturation across all 16 compartments and alerts you when one approaches its M-value: that's your NDL limit.

Here's the important nuance: Bühlmann's original M-values were calibrated conservatively for dry-air tables. When recreational computers arrived, manufacturers began applying gradient factors (GF) to tune conservatism up or down. GF 30/70 is more conservative than GF 50/85. Most recreational computers ship with GF settings around 40/85. That's why two computers on the same dive can show different times.

Where Bühlmann falls short: it doesn't account for hydration, PFO, fatigue, in-water exertion, water temperature, or the particular physiology of your body. It's a population model, not an individual one. A tech diver with poor circulation can hit DCS well within NDL; another with good circulation might come up clean having pushed past it. Statistics govern, not your personal biology.

That's why modern models like VPM-B and RGBM try to model actual bubble mechanics rather than supersaturation thresholds. The result is longer deep stops and shorter shallow stops. The debate between Bühlmann + GF and VPM is still open — tech divers argue both sides with real data. For recreational diving it's largely academic; either model works fine.

What I've learned in practice: if the computer shows 5 minutes of NDL, that's not 5 minutes of buffer — it's zero minutes of buffer from the model's perspective. Your real safety margin comes from how you use those 5 minutes in planning: ascending before the NDL, doing a solid safety stop, staying hydrated, avoiding a hard push at the end of the dive. Treat NDL as a zero countdown, not as spare time.

Something almost nobody mentions: post-dive off-gassing continues for 12–24 hours, driven by the slow compartments. That's why the flying-after-diving rule asks for 18–24 h, why sleeping at altitude after a dive is a bad idea, and why a vigorous massage right after surfacing can stir up microbubbles. Your computer turns off its screen in 10 minutes, but your body keeps off-gassing for hours. Knowing this changes how you plan an entire dive trip, not just a single dive.